Date:         Wed, 11 Mar 1998 22:20:53 -0500
Reply-To:     Jim DiGennaro <limbo@BCN.NET>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Jim DiGennaro <limbo@BCN.NET>
Organization: LiMBO
Subject:      Re: Subject: Oil gallery plugs poping
Comments: To: Vanagon Mailing List <Vanagon@vanagon.com>,
          Don Gibbons <dgibbons@PRESRAY.COM>
Content-Type: text/plain; charset=us-ascii

Hi Don,
  I had that happen on my 79 bus. It was quite cold if I rememeber.
Luckily it was a Saturday morning and I wasn't going anywhere in
particular.  I didn't have the luxury to drill and tap so I replaced it
with a new stock plug. I didn't have any problems after that. Might be a
good idea to put some lock tite or high tack on the plug before
reinstalling. I also gave the center a good tap once it was in place to
make sure the outside edge was seated. I was a little nervous abnout the
plug because it was only a interference fit but it stayed in place. Good
luck.  Take care.
--

                          -Jim DiGennaro
---------------------------------------------------------------------
                                 LiMBO, The Late Model Bus Organization, international
  zzzzzzzzzzzzz_
 |E[__][__]|[_]\\                  '82 'GTi' Westfalia
 | _ LiMBO | _ ||          'The VW DJ'
=-( )-------( )-=
James Digennaro, LiMBO's Editor and Web master.
20 First St.      URL: http://www.bcn.net/~limbo/
Adams, MA 01220       ICQ#  5534528
          LiMBO LINE: (413) 743-1814
'Transporters By The Tunnel' - A fun camping event - July 17th -21st
---------------------------------------------------------------------