Let me add some other unscientific evidence. If you clean your kitchen faucet, after a few days you will notice "water marks", its a white hard crusty substance. After several weeks, (months in my case) this stuff looks just like the stuff that causes your head gasket to blow. Just as hard. Same stuff. Eric
On Tue, 31 Mar 1998, Ian Cameron wrote: > At 12:10 PM 3/31/98 -0500, EMZ wrote: > > Pure H20 and anti-freeze is the best. Prestone is now selling > > water for cooling systems. It is 99.9 % H2O. You can use any > > anti-freeze you want, but make sure you use pure H2O with it. > > > > If you do you will not have a problem again. > > ERic > > You may be right in saying that water is a critical factor. It makes sense > that 'pure' water would be less corrosive than water with a low pH, or > water with minerals, for instance. So if someone has been keeping track of > the replies on the 'head gasket replacement' thread, take a look at the > locations. If water quality is a criterion, people liveing here in the > Pacific Northwet should have no problems, given that our water is very > soft. (Except, of course, for those who use well water.) > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.