On my knowledge the clutch could be 228mm (on my 2.0L aircooled) or 215mm (on Diesels). Presently I'm using a 240mm clutch on a machined flywheel. They all fit on the same gearing of the gearbox input shaft. Helmut '80 Camper ----------------------------------------------------- Date: Wed, 8 Apr 1998 17:45:52 -0700 From: David Marshall <vanagon@VOLKSWAGEN.ORG> Subject: Re: injun swap snafu I can't speak for Vanagons as I have only seen 228mm but Rabbits I have interchenged (along with all the clutch hardware) a 190mm for a 210mm with no problems. I think the diesel Vanagon is a little smaller than the gas so I think the ring gears should be the same! |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.