Thanx for the heads up on retorquing H2O heads. I did notice the owner's manual coverage of recommended services didn't mention this as previous manuals (air cooled) did. I had assumed this was due to improved engineering, rather than "..if ya do, you're gonna break it!" <g> ....more ponderings... Is this sealant used with the gasket? If so, it's possible you've hit on the source of the coolant creepage. Constant temperature cycling against a flexible gasket, causing the sealant to develope hairline cracks. You now have passages for the coolant to be trapped in. This trapped coolant then has it's protective qualities consumed and corrosion sets in. The corrosion tracks on the heads from my old engine had a spidery type of pattern, heavier in the area of the coolant passages. Also, if a head is properly torqued when installed, not enough movement occurs to cause cracking? I still think is must have something to do with trapped coolant, otherwise other thinner aluminum parts would be failing more regularly too. - Mark *** 91 Carat *** At 10:18 AM 4/4/98, Old Volks Home posted the following: >********************************* > >Retorquing the Wasser Heads, a procedure most common to Air Cooled VW >Engines, is specifically a no-no because the sealant applied to each of the >Head Nuts will break loose and then you will have some coolant leakage >problems. Of course, you could theoretically remove and reseal each Head >Nut, but that would get a little tedious after awhile. > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.