If the motor works from the passenger side switch then it works. It is the driver's side switch. It sounds to me like loose connections on the back of the switch. I was looking at the back of my switch today and was surprised to find that the connections were soldered! In aircraft electrical systems we rarely solder connections in areas subject to vibration or shock (doors slamming) since they tend to brake under those situations. If you can get your switch out of the door check the connections on the passenger side window switch for security of attachment and corrosion. I bet one of your wires is loose or broken. Or one of the terminals is. Ken Wilford John 3:16 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.