Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 1998)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 8 Apr 1998 23:24:27 -0400
Reply-To:     John Anderson <vwbus@MINDSPRING.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         John Anderson <vwbus@MINDSPRING.COM>
Subject:      Re: Problems with clutch bleeding
Comments: To: Scott Snyder <dipp@ACCESS.MOUNTAIN.NET>, vanagon@vanagon.com
Content-Type: text/plain; charset="iso-8859-1"

It can be tough to get it all out, there should be significant movement at the slave, look at the free travel on your old one, about 3/4"? off the top of my head. A couple quick tips, pull the wheel on that side for better acess, raise the rear of the van so bubbles go up, and invest the whopping $20 at WALMART for a Mity-Vac, you'll find other uses for it and the Mity-Vac alone can often put enough of a pull on the system to bleed out the master, which would actually be my first thought BTW. Make damn sure you had all the air out up there, crack the fitting again, pump some out dripping onto a towel or whatever. That plus the Mity-Vac pumped up well on the slave while someone else pumps the master should do the trick admirably. Or rig a pressure bleeder for the thing, there was once a rumor that a coolant cap fits the brake resevoir, seems unlikely but I never tried it, that plus a little pressurizeable resevoir of fluid with about 20psi or so on it should make bleeding all round a snap.

John vwbus@mindspring.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.