I had a kink in one of the heater cables, probably due to it sticking and I was too forceful with it at the time. This is worse in winter, of course, since everything is more viscous. For those that don't quite need to tear down their heater cables, but feel they could use some PR, try the following: Get a can of motorcyle chain lube with the long plastic tube for reaching into tight places. It's a spray can, kinda like WD-40. Remove the ashtray and/or the instrument cluster (eave all the cables and wires attached; you can just kinda look in there). Find which lever activates which cables and operate the lever such that the maximum amount of cable is exposed. Put the chain lube tube through the lever opening in the dash and drip small amounts of chain lube on the cable and operate the lever back and forth to work the lube into the tube. Don't use too much, 'cause it's sticky yucky stuff when combined with all the dust bunnies and grime behind there. Wipe up any that drips down (if you can reach it). I did this for all the cables even though only the hot/cold lever needed it. I bent the kink out and it worked fine all winter because the cable had much less resistance. BTW, I use the chain lube on the sliding door as well. Easy to get into place and then it stays since it's meant to stay on a moving chain that would fling thinner lubricants right off. -Karl '87 Vanagon GL Weekender "Beverley"; Trexlertown, PA http://www.enter.net/~bloss/vw/ VW shop list: http://www.enter.net/~bloss/vw/vwshops |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.