I just took my 84 CA model in and it failed smog: 2372rpm measured allowable 35 180 hc ppm pass 1.21 1.20 CO% fail 2.3 02 12.9 CO2 idle 923 rpm meas allowable 236 150 ppm hc fail 1.79 1.20 % CO fail 9.2 O2 7.5 CO2 The previous owner had the original O2 sensor in it at 140k, so maybe this burnt out the cat. I inspected the cat, and it is _empty_, just the outer shell remains. Are these emission levels resonable for no cat, but with a new functioning O2 sensor? I want to be sure before I put a new cat in and have it burn out. Also, the best price I found for a cat is 99$ from busdepot.com. Is there anything less out there? Are the above smog limits correct? I saw someone else with a 90 and the limit was 240ppm hc, I've also seen 250ppm hc. It would not surprise me if the shop I went to used the wrong values. Thanks much in advance.
- How can you learn from you mistakes if you don't make them often? ekumli@polylog1.calpoly.edu (o o) me-325@stn14.me.calpoly.edu ----------------------------ooO-(_)-Ooo-------------------------------- |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.