Date:         Tue, 14 Apr 1998 13:07:59 -0700
Reply-To:     vwmaster@VOLKS-MOTORSPORTS.COM
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         vwmaster@VOLKS-MOTORSPORTS.COM
Subject:      REPOST! ECU CHIP AND ROCKERS UPGRADE!!!!
Comments: To: vanagon@vanagon.com
Content-Type: text/plain; charset=us-ascii

>
> Listees,
>
>   Below is the original POST from 4/1/98.  IT WAS NOT an April Fools Joke!!!
>
>   The info is true, I will be able to prduce this "Kit" for anyone who wants it and has the correct ecu, (025 906 022D!)
>

  REPOST!!!


>   I've successfully completed our first ECU chip upgrade (022d ECU's
> ONLY!) along withinstallation of  Ratio Rockers and a set of Chromoly
> push rods.
>
>   I'm putting together a "Kit" of the necessary parts to do this
> "Upgrade".
>
>   The kit will include;
>
>   ECU Prom Chip
>   Chromoly Pushrods cut to correct length
>   Gene Berg Ratio Rockers.
>
>   The install of this will require someone that can adjust Hydraulic
> Valves correctly and someone that can open up the ECU and remove the
> Prom chip and install the "Upgrade Chip".
>
>   There will be a small amount of instructions included with the "kit"
> but for the most part if the person installing the rocker has done it
> before on any other Hydraulic VW engine it should be straight forward.
>
>   The "Kit" price will be $825.00 Plus S&H.
>
>   I have Dyno Specs to show the increases this will give, and you'll get
> even more performance if you use triple electrode plugs, a K&N filter
> and Magna Core wires.
>
>   From the seat of my friends pants he would say about a 30% increase in
> power in his SYNCRO SINGLE CAB.  He has also been carrying a bunch of
> tools with him and hasn't had a chance to run it "Unloaded.
>
>   Yes a Single Cab Syncro weighs less than a Westy or even a 7-9
> passenger vanagon, but the fact remains the same, A great deal of  Horse
> Power increase and that's what many of US are looking for!!
>
>   If you're interested in one of these kits, I need to confirm a number
> of people so I can do the first run of kits.
>
>   I'm ready to do this, I have all the knowledge and tooling to do this,
> I just need to know how many people want a kit??

--

  Kyle Wade  (408) 426-1431 OR  (408) 429-9424
  Keeper of the Volks-Motorsports page
  Home Page - http://www.volks-motorsports.com
  ICQ # 3882975