Hello, I had to purchase a used wiring harness for my 81 Westy's ECU. Unfortunately none of the wires are marked. Using Bentley's, I think I have all of them correctly identified except the wires to the thermo-time switch and cold start valve. According to Bentleys (24.12) the thermo t switch wire is slightly longer than the wire for the cold start valve. But, the color of the plastic cases that surround the wire dont match up if they are color coded. It only seems reasonable to me that the blue cased wire should go to the cold start valve (which is blue) and the brown cased wire should go to the thermotime switch (which is brown). According to Bentley, however, this is not so. Could someone look at there cold start valve and help me out? Thanks a million! Scott |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.