I just noticed my right side power mirror (just the mirror, not the big housing) was leaning horizontally being held only by the two wires. I can see how it may reattach, but I don't know how to do it. There's a circular track on the back of the mirror which meshes with a circular track inside the housing. On the back of a mirror is a lever which would seem to permit locking the mirror to the housing once the tracks are brought together, but this can't be done unless the whole assembly is taken apart because there's no room for fingers otherwise. Can I unscrew the four recessed screws to perform this fix, or is there something I'm missing? Thanks for the help. david |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.