Hi folks, minor fix, I've been stuck with a high idle once warmed up, to the point of cleaning up the throttle body, adding a heavier return spring and was getting ready to swap out the idle stab. unit. Then started checking vac lines, found the 2" long piece onto the fuel pressure regulator had cracked to bits under the cloth cover. Replaced that (and the rest) and idle is back to norm. Cheap fix, try it first. As far as fixing the rich running condition when submerging the Syncro deep, stay tuned. It _ain't_ the O2 sensor, just tried sealing the H2O sensor, time for another plunge. Damn (building) beavers have made some of my usual roads a bit wetter than normal. May need pontoons! bye, Tim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.