Date:         Thu, 30 Apr 1998 11:11:41 -0400
Reply-To:     Michael Sullivan <sullivan@OPENMARKET.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Michael Sullivan <sullivan@OPENMARKET.COM>
Subject:      Re: need power mirror help
Comments: To: Vanagon@VANAGON.COM
Content-Type: text/enriched; charset="us-ascii"

Very simple: use a flat screwdriver to rotate the tab, which rotates the ring, which locks the unit together.


Cheers,

MJS



At 12:58 PM 4/29/98 -0700, DAVID MOST wrote:

>I just noticed my right side power mirror (just the mirror, not the big

>housing) was leaning horizontally being held only by the two wires.  I

>can see how it may reattach, but I don't know how to do it.

>

>There's a circular track on the back of the mirror which meshes with a

>circular track inside the housing.  On the back of a mirror is a lever

>which would seem to permit locking the mirror to the housing once the

>tracks are brought together, but this can't be done unless the whole

>assembly is taken apart because there's no room for fingers otherwise.

>

>Can I unscrew the four recessed screws to perform this fix, or is there

>something I'm missing?

>

>Thanks for the help.

>david

>

>

<bold>Michael J. Sullivan

</bold><italic>Director of Catalog Design

Open Market, Inc.

</italic>

*************************************

  work: http://www.openmarket.com

  play: http://www.hsdesign.com

*************************************