>| << Wondering if you could help me? We have an '87 GL that ran perfectly until >| the other day. Climbed in her to go to work one morning (dead cold) and >| tired to fire her up. Sputtered once as if every cylinder fired once and >| then nothing. Will not even sputter again. The next day try >| again...sputters once (again like every cylinder fired once again) and then >| nothing...no sputter no smell of gas after continued cranking. [snip] >| Sounds like fuel pump, fuel pump relay, or possibly the 15 power curcuit to >| the coil wich goes to your digifant relay and then your fuel pump relay. Also check the connector coming out of the distributor for the hall sender. This has been known to crack and allow the signal to ground out to the distributor body. You need to pull the cap, rotor, and dust cover to check to see if the eblow has cracked allowing the wire connector to touch the distro body... I fixed this by slipping some electrical tape between the broken connector and the distro body... dave |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.