Date:         Mon, 4 May 1998 23:56:42 -0700
Reply-To:     Rick Gordon <rickgo@HALCYON.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Rick Gordon <rickgo@HALCYON.COM>
Subject:      re blueprinting
Comments: To: Vanagon mailing list <Vanagon@GERRY.SDSC.EDU>
Content-Type: text/plain; charset="us-ascii"

>Hello-
>        I was hoping someone might tell me what blue printing is. From
>what I gather, it seems to be used when checking for straightness and maybe
>to verify that sealing surfaces are flat. I get the image of taking a part
>and pressing it on carbon paper or something similiar to make a print - is
>this close?
>
i think that it involves dismantling the engine and making sure everything
is within tolerances for both size and weight. (Kind of like putting tires
on a Syncro (or so I'm told!)) Then of course putting it all back together
again.
End result being you get a higher-compression, well-balanced engine that
runs more smoothly.
(an acquaintance of mine always about doing this - but then he owned a
Citroen DCV that he was always working on too!)

Rick Gordon
Bainbridge Island, WA, USA
-------------------------------------
rickgo@halcyon.com
http://www.halcyon.com/rickgo/
KC7QEG
-------------------------------------