Date:         Tue, 5 May 1998 17:28:25 -0700
Reply-To:     David Marshall <vanagon@VOLKSWAGEN.ORG>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         David Marshall <vanagon@VOLKSWAGEN.ORG>
Subject:      Re: Rabbit Vanagon Manifolds
Comments: To: Erik O <koesel@UAKRON.EDU>, Vanagon@VANAGON.COM
In-Reply-To:  <354F8240.CE21F75D@uakron.edu>
Content-Type: text/plain; charset="us-ascii"

Eric,
I am using an Audi Fox manifold and down pipe for my swap.  It all fits
perfectly.  Right after the down pipe there is a 90deg bend and round
"turbo" muffler tucked out of sight.  A little raspy when I wind it out to
5000rpm, but that engine is SOOO far back there that I don't notice it
unless I roll down all the windows.


At 17:18 5/5/98 -0400, Erik O wrote:
>Well I thought I had the right manifold for the job, but as it turns out
>the one I purchased is too tall. I want to add a 4-2-1 exhaust
>manifold/downpipe to my GTI powered Westfalia and need to know exactly
>what will fit in there and clear the engine mount. I've been told that
>the late model Dashers and the Fox will fit. I thought I had purchased
>one from a Fox, but the guy I bought it from probably just made a
>mistake. If anyone out the can give me the specifics, I'll know exactly
>what to ask for when I return this one. TIA
>_______________________
>Erik O        Akron, Oh
>82 GTI Westfalia
>http://ebyte.com/gl
>http://ebyte.com/wow
>
>

-- David Marshall, Quesnel BC, mailto:david@volkswagen.org --
   -- 78 1.8L VW Rabbit, 80 2.0L VW Caddy, 87 Audi 5KQ  --
   -- 85 1.8L VW Cabrio, 88 1.6L VW Syncro Double Cab   --
   -- Volkswagen Homepage http://www.volkswagen.org     --
     --  USE DAVID@VOLKSWAGEN.ORG WHEN SENDING EMAIL  --