On Sun, 17 May 1998, Tom Young wrote:
> My question is: Why? Since I'm going to torque the flywheel back on in a > proper fashion, and haven't disturbed anything, and we're dealing with > mechanical parts, not living tissue, why the insistence on checking the > endplay? Because it's SO much easier to check and adjust it NOW, when you have the engine out, then later, when you would have to remove the engine again, to do it. The endplay changes due to mechanical wear and tear. The shims can get thinner, over time, from the friction, the bearings and everything get some wear on them, etc etc... > As far as I know the endplay is OK (engine rebuilt 20k miles ago) and > since I'll have to use the "bar stock" method, I'd really like to avoid > doing this, if I can. I would recommend it, just because you CAN.:) But then, it's your bus, and your engine...:) I dont check mine everytime I have it out, but I do yank on my pulley, everynow and again, to make sure I haven't had any drastic change...:) just my half dollar....david > Can anyone elaborate? > > --------------------------------------------------------------------- > Tom Young young@sherlock.SIMS.Berkeley.EDU > Lafayette, CA 94549 '81 Vanagon > --------------------------------------------------------------------- > -- David Raistrick '69 Westy-Itchigo keen@finally.atlasta.net '66 SO-44 Westy (coming soon!) in Augusta Ga |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.