Hi, I have a set of 4 take-offs FS, 6x15, ET45, 5 bolt 112mm circle, ie. they fit vanagons BUT the centre of the rim must be machined out to about 2" to clear axle stubs. $200US/set or best offer, plus UPS shipping (est $40-50). They can use the stock lugs/nuts, but you will be short about 1/8"-1/4" due to smaller head diameter. FLAPS can likely help you cheapest. I've used identical rims on my Syncro for 6 months with 235/75/15 mudders on, so they will stand up to the loads. 205/60/15 gives almost stock rolling diameter and looks great!! Also have 4 wheel covers for same, nice big 5" diam VW logo in centre, silver metallic, flexible. They'll fit fine up front, but the axle nuts are 1/4" too tall to let them fit on rear. $100/set or best. They looked great on my van. You _could_ cut out the VW logo to clear the stubs.....
bye, Tim
on east coast of Canada, past Maine. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.