Date:         Mon, 18 May 1998 10:18:14 -0600
Reply-To:     Rob MacLeod <macleod@CVRTI.UTAH.EDU>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Rob MacLeod <macleod@CVRTI.UTAH.EDU>
Subject:      Re: Hatch strut problem
Comments: To: Vanagon@VANAGON.COM
Comments: cc: bpremack@wavetech.net

Folks,

Thanks for all the great suggestions on the tailgate struts.  I ended up
taking some 3/4" PVC pipe, that same stuff I use for all the underground
sprinkler lines, and making the "supports" as suggested by Erik O and Karl
Bloss.  Worked like a charm.  At some point, I'll probably replace them
with new structs (thanks, Jim), but having just bought the vehicle, I'd
rather apply some triage to where I put money.

I have some questions based on a pleasent Sunday afternoon of
investigating and cleaning the bus, but will check archives first.

Being part of this whole wonderful vanagon community is great fun--are you
sure we're not all doing something illegal? (-:

Rob
--
--------------------------------------------------------------------------
Rob MacLeod, Ph.D.
Nora Eccles Harrison Cardiovascular Research and Training Institute (CVRTI)
Building 500, University of Utah
Salt Lake City, Utah 84112                      ____  __o
Internet:  macleod@cvrti.utah.edu              ____   -\<,
Phonemail: (801)581-8183                         ....0/ 0
Fax:       (801)581-3128
---------------------------------------------------------------------------