i was wondering if any of you can help me out here. i have an 87 syncro with the factory cruise. when i bought the van the plug that would be for the clutch vacuum valve was jumped with a jumper wire. the reason being that the plug from the wiring loom was the male type and did not plug into the valve. after exhausting all possibilities i can't seem to figure that one out. i checked continuity between this plug and the plug for the brake valve and it checks out. what i need your help is; what color are the wires going into the clutch and the brake vacuum valves./???? the bentley manual is not matching mine. i am leaving to new mexico(from minneapolis) and cruise would be awsome. thanks in advance to you all.
ciao nigel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.