Date:         Sun, 24 May 1998 11:41:02 -0400
Reply-To:     John Anderson <vwbus@MINDSPRING.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         John Anderson <vwbus@MINDSPRING.COM>
Subject:      Re: calculating speed from rpm~reply
Comments: To: vanagon@vanagon.com
Content-Type: text/plain; charset="iso-8859-1"

>                     RPM X Tire diameter       (say 25" tall for example)
>MPH =          ~~~~~~~~~~~~~~~~
>                    Final drive ratio X  336


And if anyone is feeling lazy, I have a nice Lotus spreadsheet I wrote a
while back that calculates all this in a table of rpm versus speed that I'll
send them.  I posted it a year or so back but finding it in the archives may
be hard.

John
vwbus@mindspring.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.