Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 1998, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 29 May 1998 09:50:16 +0200
Reply-To:     Jimmy Sanby <sanbyj@TELKOM.CO.ZA>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Jimmy Sanby <sanbyj@TELKOM.CO.ZA>
Subject:      5 spds -Reply
Comments: To: Vanagon@VANAGON.COM

To solve some of the dispute, here is some specs for SA busses

2.5l 5 Cylinder 100kw @ 5000RPM 200NM @ 3500 Bore 82.5 Stroke 92.8 175 NM @ 2000 RPM Fuel Injection K-Jetronic Wheels 205/70 14 258 Solid disks on front diff 4.833:1 1st 4.111 2nd 2.333 3rd 1.476 4th 1.023 5th 0.816 Reverse 3.667

2.6l 5 Cylinder 100kw @ 5200RPM 200NM @ 3000 RPM 190 NM @ 2000 RPM Bore 82.5 Stroke 95.5 Fuel Injection Bosch Motronic M1.5.4 Wheels changed to 205/65 15 277 Vented disks on front diff 4.571:1 1st 4.111 2nd 2.333 3rd 1.476 4th 1.023 5th 0.816 Reverse 3.667

Cheers

Jimmy Sanby '89 Syncro 15" Cape Town South Africa

>>> Helmut Zeidler <Helmut_Zeidler@NOTESMAIL.NOKIA.COM> 27/May/1998 09:06pm >>> >There are true 'street' 5 spds avail from VW-South >Africa, with Audi 5 cylinder bellhousings attached. >These are the 105mph versions and need the 130HP to >get there. Indian Vic (list vendor) had some FS for >$2200US a while back. Not very close in layout to >Syncro 5spd, which is more a 4spd with low gear >extension added to the box. So no way will you ever >get a 6spd Syncro :( You would need to change the >bell. + input shaft likely, and I'd wonder about the >output drive/CV flanges also, better to find a turbo >Audi 5000 or 200 engine and do a total swap of the >drivetrain. The SA tranny does nothing have to do with the top speed. With the 5 cylinder swap to 136 hp I get the 105 mph with the old 2.0L aircooled tranny.

Check http://www.relitech.com/helmut/GEARBOX.HTM for the German/US and the SA gearings.

The inputshaft of the SA tranny is like the standard Vanagon, but the drive/CV flanges are of that make you will find at the Syncros.

As the SA trannies are not that expensive (DM 2400.- at Winkler, Germany) you may choose to swap the whole drivetraing including the inner CVs.

Helmut '80 Vanagaudi


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.