marcus wrote: > > I will try and answer both of your posts. First of all only white grease > goes on the shifter ball, the master cylinder suporters both the brakes and > clutch slave cylinder. This shifter ball may be cracked or just dirty. It is > a two part ball. You may have to replace it. OK, but that's not the question :-) I lubed the shifter ball with no problems. I have no problem there. Nothing needs to be replaced. Want I want to know is how to lube the clutch pedal.
The glove box drops down on two > rubber lines. I had to replace them due to excess pressure on the rubber > lines.You could replace them with a strong cord. > Also, that's not the question. :-) The cords are fine. The latch is broken. I just need another one. Any tips on where to find one for less than the $40 new price? Sean Bartnik Johnson City, Tennessee '81 Vanagon L Westfalia |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.