Date:         Sat, 6 Jun 1998 00:25:44 -0700
Reply-To:     Bill <Bill@FREEHOLDER.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Bill <Bill@FREEHOLDER.COM>
Subject:      Re: Removal of Vanagon Engine
Comments: To: vanagon@vanagon.com
Content-Type: text/plain; charset="us-ascii"

Having never done it before, I removed the engine in my '81 in about four
hours total, following the instructions in Bentley and Haynes.  I supported
the rear of the vehicle on jackstands, supported the tranny with a
hydraulic jack and wood block, and used a floor jack and wood to lower the
engine.

The four hours was from starting to disconnect things until the engine was
completely out, and I was working by myself.  Although I had never removed
a VW engine before, I did have a lot of experience working on other
vehicles, including other engine removals, but the VW is pretty easy to
work on.
Bill (SE Arizona) (Bill@freeholder.com) HTTP://www.freeholder.com
----------------------------------------------------------
You can't do everything, but you can do something.
You can't help everyone, but you can help someone.
Even one candle helps to push back the darkness.