Hmmm, interesting, Frank! I did not realize the differnce between the notches was so little! But you know? When I poured a beer in the oil pipe it didn't bring the level any?? The froth overfilled my engine. Time to drain again!! ;> David >As a rule of thumb, you need half quart (pint) to fill up from the lower >notch to the top notch of the measure stick. The difference between the >US quart and the slightly larger UK quart is too small to make any >difference. >If you buy a one pint pewter tankard in the UK and ask for a draught >beer in the US, you get one US pint of beer and a half inch of froth in >the 'larger' tankard. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.