Björn wrote in reference to a group of relays I should check and see if are wet: On the right rear there is an air channel from the top towards the engine. Inside it accessible from the engine there is the relay box. The air from the engine is usually taken from there. On Syncro models the channel is actually covered with a cardboard/plastic cover which can be removed. This is accessible from the engine on the right rear. I looked at this location. The air hose from my air cleaner is hooked onto a plate like thing in the hole where the air comes out after being funnled from above. How do I remove this plate? I looked and it appears that it is secured from the other side, but I can't find the other side! Any ideas welcome...Thanks.... -Chip
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.