HEY VOLKS, To add to my earlier instructions on making your own guage cluster. I filled the void between the three pvc "tubes" with 5-minute epoxy, but only after positioning some threaded rod in the angled end for use as a mounting device. Then I drilled a hole in the dash just to the left of the speaker perforation for a location for the cluster. I'll try to get a picture, or at least a diagram for someone who want to attempt making one of these things. I did it in a couple of nights, without too much trouble. Mark Thoma
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.