Date:         Thu, 18 Jun 1998 00:57:47 EDT
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Re: Projektzwo Fog Lamps
Comments: To: Kim@aol.com, Vanagon@VANAGON.COM
Content-type: text/plain; charset=US-ASCII

In a message dated 98-06-17 23:49:46 EDT, Kim@AOL.COM writes:

<< Well, now that I have my Syncro back again, I'm looking at the P'zwo fogs
that
 I ordered....It looks to me like I'm expected to cut the lower grill. I
didn't
 expect that, nor am I quite sure how to do that so it is a clean look when
 finished. >>



nope...P'zwo fogs mount as easy as cake.  no cutting/drilling required.

-remove your turn sig lenses.
-remove lower rad grille outermost screws.
-get your wiring run down to them.
-slap on the P'zwo driving lites. (well, don't "slap" 'em on... at nearly 300
a pair, treat 'em like a newborn)
-put your turn sigs back on.
-put the lower rad grille screws back on thru the P'zwo drivin lite bezel,
holes should match up.

piece-O-cake :<)

yes, the P'zwo bezel overlaps the lower rad grille, thats why the edge is cut
at an angle.

chris