Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 1998, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 23 Jun 1998 14:52:48 -0700
Reply-To:     Old Volks Home <jim@OLDVOLKSHOME.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Old Volks Home <jim@OLDVOLKSHOME.COM>
Subject:      Re: need help from someone to look at their engine...
Comments: To: Michael Sullivan <sullivan@OPENMARKET.COM>, Vanagon@VANAGON.COM
In-Reply-To:  <3.0.32.19980623160701.009d0bb0@mail-60.openmarket.com>
Content-Type: text/plain; charset="us-ascii"

Try your VW Dealer again.

025-129-420. It's still available (according to VOA in Troy, MI) and in the 6-1-98 price list at $5.25 (!) for a teeny-weeny little piece of metal. Looks like the parts guy didn't wanna bother ordering it in my opinion. Probably better off making it like you suggested.

When swapping in a 2.1 in my 84 Westy last year, I didn't encounter this piece. Just went to check it just now and apparently I've been running without this piece the whole time I've had it on the road. Dunno if it means good or bad. Can anyone with knowledge comment?

See also Pages 24.24 and 24.24a of the Vanagon Bentley. Looks like they show a size of .006" or 0.15mm, but they don't indicate if it's ID or OD (Probably ID).

*************************************** At 04:07 PM 6/23/98 -0400, Michael Sullivan wrote: >I am missing a little piece from my fuel evaproative control system called a "restrictor" which is a small, 1/2" piece of round metal or plastic rod with a small drilled hole in it -- hence the name "restrictor". It is located inline with the vacuum hose that comes from the charcoal filter valve located in the top-right of the engine compartment as you are looking down on the engine. > >See page 20.16 and 20.33 of the Bentley manual. > >Well, VW no longer carries this part so I am going to fabricate my own from a piece of aluminum rod. Only thing is I don't know how small a hole to drill. Could someone measure their's and pmail me with the proper dimension??? > >Thanx. > > >Michael J. Sullivan *****************************

Good Luck!

Jim Thompson 84 Westy 2.1 * 62 Sedan * 90 Fox Wagon Check out our latest cool stuff at: http://www.oldvolkshome.com ------------------------------------------- NEW! - VDO Products Online Catalog! http://www.oldvolkshome.com/ovhvdo.html NEW! - Bus/Pickup 68-79 Online Catalog! http://www.oldvolkshome.com/bus6879.html ------------------------------------------- Check out the Odd, Weird, One of a Kind Items For Sale On the "OddBall Page" http://www.oldvolkshome.com/oddball.html ------------------------------------------- Sherwood Automotive * The Old Volks Home PO Box 176 * Palo Cedro, CA 96073-0176 (530) 221-5342 (Voice or Fax) jim@oldvolkshome.com jim96003@c-zone.net


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.