At 4:15 PM 6/28/98, Joe L. wrote: >One thing you might try. Get a can of WD-40 or the like, Turn on your vent >fans and make sure you are sucking outsike air, go to the air intakes on the >front of the van and spray the WD040 directly into the intakes. > I tried this when my fan berings were making a racket and I could not find >the ambitition to take the dash apart. > >IT WORKED!!!!! > > It took a while for the WD-40 to work its way around to the bearings and >for a while these was WD-40 smell inside the van but both the sound and the >racket went away in a couple of days. That was about 4 months ago and all is >still quiet. > Do NOT use WD-40 for this purpose! Use a silicon spray lubricant or some other aerosol dispensed lubricant...WD-40 is a solvent and will dry out your bearings!
OLTECO Ari Ollikainen P.O. BOX 3688 Networking Technology and Architecture Stanford, CA Ari@OLTECO.com 94309-3688 415.517.3519 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.