In a message dated 98-06-30 13:08:37 EDT, fporter@EYRING.COM writes: > Lower the van back down and again mark/measure the compressed length the > shock with the jack removed. Between these two steps make sure you drive the van around the block to allow the sproing, shock, and wheel to return to their natural state. > Measure the compressed length of the spring (just the spring) with the > spacer in place. Regards, Jim Davis |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.