---------------------- I'm a retired computer technician not an engineer or Dr. either , but have used torque wrenches quite a lot in computer rooms. IBM my company used the ratcheting clutch type and had them calibrated annually . These wrenches need TLC to maintain their accuracy. In my home shop , shed in the timber, I prefer the older style with the pointer . I have a 1/2 drive and a 3/8 inch drive and feel when used with care they give me all the accuracy I need for my van . If speed is important the clutch type are far better tools. The important thing to consider is the clutch style need to be well cared for and calibrated on a regular basis. Darrell Boehler Makanda Illinois
-----Original Message----- From: J. Andersen <janetda@CRIS.COM> To: Vanagon@VANAGON.COM <Vanagon@VANAGON.COM> Date: Friday, July 03, 1998 8:13 AM Subject: Re: question for an engineer
>I am not an engineer but I've ridden on a train once. It is my >understanding that one of the functions of a torque wrench is to ensure >that all the bolts have the same tension on them. If your wrench is >off its calibration it should still be useful as long as you do all the >bolts the same each time you use it. > DrRufo > SOCal-81 vanagon > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.