VWers, I just installed a rebuilt in my 84 Westy. I installed new injectors,seals,hoses,wire ,cap,plug,rotor,filters, and fluids. It ran good for a couple hours after the initial start up . Now it wants to stall or sputter and backfire when I hit the gas and it idles ruff. I also installed a new cat and complete exhaust so I know that it not clogged. So far I have metered the coil seems ok and plugged the idle stabilizer end together no change. I redid all grounds and checked them for continuity. What next? I know it's not gas. I removed the tank and replaced ALL the fuel lines and seals. Any suggestions? Thanks again, Bill M Mystic, CT 84 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.