Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 1998, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 1 Jul 1998 10:00:36 -0500
Reply-To:     Maureen Stretch <mstretch@SPRINTMAIL.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Maureen Stretch <mstretch@SPRINTMAIL.COM>
Subject:      Re: Oil drain  may be stripped? How fix?
Comments: To: S_J_ WACKER <s_j_wacker@JUNO.COM>,
          Vanagon List <Vanagon@VANAGON.COM>
Content-Type: text/plain; charset="US-ASCII"

Thanks to all of you on the list who have helped. I could not believe a stripped oil drain would cause the loss of the engine, but I did skip a couple of heartbeats when the dealer said that.

I feel confident I can get it fixed without loss of billions of dollars or the engine. As usual, the list has been of great help.

I am going to find an auto repair course locally and get started on doing my own maintenance. As klutzy as I think I am, I doubt I could harm the Vanagon more than some of these dealerships seem to want to.

It is funny what makes you realize how much you love your Vanagon!

>Maureen, I just had the same problem on my 86 Syncro and I too panicked, >but only for a moment. I quickly realized that it would be a pretty poor >design if you had to replace an engine every time oil drains got >stripped. Since I had never dealt with this problem before, I took it to >my mechanic and watched him drill out the old drain, then use a tap (a >drill bit type tool) to make new threads in the case. Next the heli-coil, >which looks like a small spring, is threaded into the new hole with a >special tool, job done. Cost me $40 and took about 15 minutes. Make sure >the mechanic is careful to remove all the metal from the drilling before >you refill with oil, this can be done by pulling the shavings out with a >vacuum and flushing with oil. You could buy the kit to do the job >yourself for about $35 dollars. > >You don't need a new engine, stay away form the dealer that told you >that. Any mechanic that can find his way to work without his mom in the >car can repair a messed up thread. > >First ya panic, then e-mail the list, then armed with knowledge, go deal >with your mechanic...and don't let them charge you an arm and leg for a >simple fix. Someday you may even want to try to do this job yourself, I >did, just fixed three holes for my exhaust manifold. > > >Steve and Jo Ann Wacker >San Marcos, Ca. >90 Carat >86 Syncro >86 Audi 5000 CS Quattro > >_____________________________________________________________________ >You don't need to buy Internet access to use free Internet e-mail. >Get completely free e-mail from Juno at http://www.juno.com >Or call Juno at (800) 654-JUNO [654-5866] >

Maureen Stretch Natick, Mass. 91 Vanagon GL Westy "Johann"


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.