Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 1998, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 12 Jul 1998 22:14:45 -0700
Reply-To:     "Walter E. Stephens" <aerocraf@WHIDBEY.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         "Walter E. Stephens" <aerocraf@WHIDBEY.COM>
Subject:      Re: Head gasket questions
Comments: To: Gary Kovach <dearbo@EROLS.COM>, Vanagon@VANAGON.COM
Content-Type: text/plain; charset="iso-8859-1"

Just did mine this weekend. Permatex, no! use the real black stuff. Bently manual is hard to ferret out, but most all of what you need to know is there. The cylinder base gaskets, I do not think can be changed with out pulling the cylinders. I don't think you want to do that, if it can be avoided. Leave the old rings is place, and keep your fingers crossed. Most engines do not have a problem with using the base rings over I understand. The extra O-ring, consider your self lucky. I have bought four engine gasket kits over the years, and not one hase been complete. The missing item is defferent in each kit. Fuel hose must be high pressure hose, not the stuff they comonly sell in auto stores. I bought some from a speciality VW shop. I cost $1.19 per foot. -----Original Message----- From: Gary Kovach <dearbo@EROLS.COM> To: Vanagon@VANAGON.COM <Vanagon@VANAGON.COM> Date: Sunday, July 12, 1998 7:55 PM Subject: Head gasket questions

>Volks: > >I'm replacing the head gaskets in my Vanagon and have a couple of questions. The heads >are finally off and I've put the metal sealing rings in the heads. Where do the thin >green O-rings go - around the lip at the top of the cylinder? Bently isn't clear on >this. The thicker black O-rings go at the base of the cylinder - can you install them >with out pulling the cylinder out past the piston rings? Should I replace it anyway? >There was 1 extra O-ring in each one of my my kits - same diameter as the black rings >but about 2x the thickness - I have no idea where it goes. > >What do you think about Permatex gasket sealing compound? > >I'm also going to replace the fuel hose that goes to all the injectors. Can I get >this at the local FLAPS or is it a special VW item? > >Gary >88GL


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.