Dave writes: <<<<< To sum this up, it looks like the head needs to come off because no matter what I try, a bunch of stuff is going to make its way into the cylinder... Also, the threads do not appear to be crossthreaded (it broke about 2 or 3 threads down into the hole and the exposed threads look ok). The center electrode came out with the body of the plug so I really only have the threads and the three prongs left. dave >>>>> Say Dave, just curious. What crappy brand of spark plug was this so I can steer clear of them?? Good luck with your project. Everything is a learning experience after all and thus well worth the time you put into it. Let us know how it comes out. Regards, Carl Turner |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.