I posted this request a while ago, but I had no responses, so I'll try again. I need someone to pull out their right rear taillight assembly and jot down the colors of the wire from top to bottom. "But Dave, why do you need this?" Well, it seems that when I went to check my Idle stabilizer about three weeks ago I was learly of scratching the lens on the bumper so I pulled on the wires rather than the connector (there is a lesson in there somewhere) and TADA! The connector stayed on and the wires came out. Bentleys shows the colors of the wires and what they go to but not the connector and how they are arranged. After some trial and error I have it working, but funny things happen, like when I hit the brakes, the brake light AND the reverse light come on, so I know I don't have it quite right. Any help would be appreciated Thanks Dave 86 Vanagon GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.