At 09:36 AM 7/24/98 -0600, you wrote: The fan >would come on appropriately (However, there seems to be only 1 fan speed), >and no lights on the dash would light up. John, Everything you mentioned sounded normal to me except for this one line. There should be a high and low speed for the fan. The high speed should kick in as the needle creeps up past the led middle range. I would check to make sure that the fan motor, switches and sensors are operating pro- perly to make sure that the fan works at the higher speed when it is supposed to. As a side note, I've noticed that my higher speed kicks in more often than it used to. I suspect either a tired thermo-switch or.... my radiator core has some hot spots.... :( Good Luck! Steven Sacramento, CA sjohnson@calweb.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.