Date:         Mon, 27 Jul 1998 14:30:51 CDT
Reply-To:     Joel Walker <JWALKER@UA1VM.UA.EDU>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Joel Walker <JWALKER@UA1VM.UA.EDU>
Subject:      Re: adjusting wiper fluid spray
Comments: To: Vanagon Mailing List <Vanagon@vanagon.com>
In-Reply-To:  <35BCD1EF.BFF50509@pittstate.edu>
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 27 Jul 1998 14:15:59 -0500 -Chip said:
>Is there a way that I can adjust the spray that comes out of my wiper
>fluid sprayers? The drivers side barely hits the windsheild and the
>passenger one goes clear up over the van. I think the PO was hoping  to
>actually hit the back window allowing the luxery of not fixing the rear
>one. he he :)
>It looks like I could stick a needle tool in there to move the nozzle,
>but I am not keen on braking anything I can't afford to fix. (right now
>that is anything)

you got it: i keep a small safety pin in my bus for just that purpose ...
adjusting the nozzle spray. just stick a straight pin, safety pin, needle
or some other very tiny metal pin (don't use wood or plastic ... it might
break off and then your nozzle is clogged!!) and very very carefully move
the little silver "ball" ... but be warned: it doesn't take much movement!
you almost always have to do it 3 or 4 times to get it right. :)

joel