I found one a Fast German Auto for just over $30 plus a $100 core charge. Pete peterz@gte.net 83.5 Vanagon -----Original Message----- From: Jerry Granito <VANAGONE@AOL.COM> To: Vanagon@VANAGON.COM <Vanagon@VANAGON.COM> Date: Friday, July 31, 1998 3:07 AM Subject: Re: ECU Chip Upgrade Info.
>In a message dated 98-07-31 01:20:18 EDT, buspilot@WORLDNET.ATT.NET writes: > ><< The chip should have sufficient > capacity to handle additional headwork, cam changes and exhaust work (but > to what degree I did not fully explore). Even a three angle valve job > would be a worthwhile improvement. Richard did wisely recommend a valve > spring upgrade if one departs from the profile of the stock cam. >> > > >And where might one find an aftermarket camshaft for the old waterboxer? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.