> Also, does the heater coolant loop need to have constant flow for the > Subaru system to work well over time? chuck, i would strongly recomment that you keep a constant flow through the heater coolant loop. it seems to me that if the cooland just sits in the pipes, there is more of a chance that rust or corrosion could get into the system. my $.02 worth
Sudhir H. Desai 1984 VW Vanagon 3.4 liter Chevy V-6 cdes@welchlink.welch.jhu.edu 1996 Subaru Outback 2.2 liter flat-4 sudhir_desai@geocities.com 1997 Jeep Cherokee 4.0 liter I-6 ICQ# 8255956 http://www.geocities.com/MotorCity/Speedway/1889 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.