Date:         Fri, 31 Jul 1998 18:55:16 -0600
Reply-To:     Gary Shea <shea@GTSDESIGN.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Gary Shea <shea@GTSDESIGN.COM>
Subject:      Re: side sliding window latches...
Comments: To: Bob O'Shaughnessy <vanagon@COLUMBUS.RR.COM>
Comments: cc: Vanagon@VANAGON.COM
In-Reply-To:  <199807312236.SAA25220@m5.columbus.rr.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII

I have what I presume are these 'nylon slider inserts', matte silver
plastic-y things, maybe one and one-half foot long,
S-shaped (a mighty square s...), wrapping around the bottom of
the sliding window and, towards the outside of the window,
over the top of an adjacent window frame extrusion.

I have them on all my sliding windows (both vans), but I have one
side window on each van which does not lock.
Yesterday I was looking at them thinking
that maybe the bottom has almost worn through, lowering the sliding
window by a 1/16" or so.  Perhaps that's all it takes.  How do you
get those things off?  Mine sure don't want to budge... I would have
guessed they were glued on.

        Gary

On Fri, 31 Jul 1998, Bob O'Shaughnessy wrote:
>      Joe, first check first to see if your window has the nylon slider
> inserts on the outside of the window.  If these are missing, the sliding
> part of the window will fall down far enough that the latch won't catch
> on the notches.  The parts are a few bucks each at the dealer.
>
>      This is also a great way to non-destructively break in to your van
> if you ever need to.
>
> _________________________________________________________
>
> Bob O'Shaughnessy,         Columbus, OH
> vanagon@columbus.rr.com
> 85GL (awaiting Multivan interior)
> 74 Bus (Dad's)
> 72 Wife, 94 Rabbit, 95 Cat, 96 cat, 98 Kid
>

-----------------------------------------------------------------
Gary Shea                                       shea@xmission.com
Salt Lake City                      http://www.xmission.com/~shea