On Thu, 6 Aug 1998, Lawrence Johnson wrote: > Lasha wrote: > > Modifying the Idle Stabilizer: > > I have been told by the "VW Bus Heaven" that there is a fix for the > oscillating idle that I and others are experiencing (+/- 25 rpm per > second). It involves adding a set screw to the inlet side of the idle > stabilizer and using the set screw to depress the valve. I haven't tried > this yet and before I do I'd like to hear from anyone else who has tried > this or heard about this procedure. > > Larry > '86 Syncro Westfalia > There is an adjustment screw. It is located between the 2 pins on the electrical connector. You will find an set screww there. Remove this screw. Hidden below this is the hex head adjustment screw. Eric |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.