In a message dated 98-08-02 22:57:52 EDT, young@SHERLOCK.SIMS.BERKELEY.EDU writes: << monitoring the voltage output of the sensor while adjusting the mixture. You adjust until the output is about .5 volts; you never really see a steady .5 volts, but a rapid fluctuation above and below that point. Counterclockwise leans and clockwise richens. On Sun, 2 Aug 1998, Dan Hall wrote: >> When adjusting the mixture to around .5 volts (500 millivolts) be sure that the O2 sensor connection wire is disconnected while doing this proceedure. Michael Modl 87 syncro 87 Quattro |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.