Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 1998, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 5 Aug 1998 23:15:27 EDT
Reply-To:     Westys4evr@AOL.COM
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Karl Mullendore <Westys4evr@AOL.COM>
Subject:      Re: Sliding Door Handle Cylinder Replacement-lock cylinder removal
Comments: To: GeorgeArfken@WEBTV.NET
Comments: cc: Vanagon@VANAGON.COM
Content-type: text/plain; charset=US-ASCII

Look at the handle very closely,on the round portion-you should see a tiny spot of a sealing compound,which you need to dig out VERY CAREFULLY.Then you will need a tiny flat-bladed screwdriver(like a jeweler's type)to unscrew a tiny locking screw that holds the cylinder in place.Remove the lock cylinder with the key installed to minimize the chance of losing all the tiny cylinder pieces.Good Luck!

Karl


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.