Date:         Fri, 7 Aug 1998 22:18:03 -0700
Reply-To:     marcus <marcus46@FREEWWWEB.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         marcus <marcus46@FREEWWWEB.COM>
Subject:      Re: Need Help adjusting clutch master cylinder
Comments: To: Dennis Haynes <dhaynes57@EMAIL.MSN.COM>,
          "Vanagon@VANAGON.COM" <Vanagon@VANAGON.COM>
Content-Type: text/plain; charset=us-ascii

Dennis
I told him about the same thing.Funny part is I went to drive my 1983.5
and I had zero clutch pedal.The slave went out and the boot was holding
the fluid so at first It didn't appear to have a leak.The other day I
tried to help a guy with gas smell.Then next day I have a gas
smell.Dennis if some one says their pregeant I'm in big trouble. I could
use the money but Morning sickness and the Larry King show doesn't
appeal to me.:<)   Marcus

Dennis Haynes wrote:
>
> The clutch rod will never need to be adjusted.  Even after changing the
> master.  Try bleeding the clutch slave cylinder.  May be vapor locked due to
> the brake fluid never being changed, absorbing moisture, than vaporizing due
> to engine/Trans heat.  Other possibility is that the pressure plate is
> failing.  This is fairly common with this clutch.
>   Dennis
>
> -----Or