Date:         Mon, 24 Aug 1998 14:06:33 -0500
Reply-To:     Mark Mages <mmages@GIE.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Mark Mages <mmages@GIE.COM>
Organization: Gulf Interstate Engineering
Subject:      autotech spacers
Comments: To: Karl Mullendore <Westys4evr@AOL.COM>,
          Vanagon Listserv <Vanagon@VANAGON.COM>
Content-Type: text/plain; charset=us-ascii

>If some one gets their hands on just one,let me know-I will fabricate
many at
>next to nothing for any list member who needs them! Even a photo of one
will
>do. Autotech seems a bit fat and greedy,IMHO.

>Karl
>(with lathe ready and waiting)

******************************************

Hey Karl

I can describe it well & they have some pix on the website

it is the same circumference as round part of the window crank and
approx 1/2" thick

one side has the female end of the gear, the other side has the male
end.  You could probably get a decent wax mold off of your crank....

If you really need it, I could part with one of mine as long as you
promise to give it (or a reasonable functioning facsimile) back.  I'll
even send you the extended screw so you can make kits.

BTW - as for the outrageous S/H, I offset it by picking up some nice
floormats for my scirocco... cost .20 extra to ship those....

Mark
87 westy
84 'Rocco