Date:         Thu, 27 Aug 1998 19:23:00 -0400
Reply-To:     Douglas <douglas@PRAXIS.NET>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Douglas <douglas@PRAXIS.NET>
Subject:      Re: What are these bearings telling me?
Comments: To: Tom Young <young@sherlock.sims.berkeley.edu>
Comments: cc: VANAGON@GERRY.SDSC.EDU, type2@bigkitty.azaccess.com
Content-Type: text/plain; charset=us-ascii

The case is bored 0.25mm.

U1; first undersize

0.25; mm cut

The type 4 had 3 undersize bearing sets, 0.25mm, 0.5mm 1.0mm

Douglas



Tom Young wrote:

> Hi all:
>
> I split the case of my junk yard Vanagon 2.0L engine.  Looking at the
> back of the #2 main bearing insert I'm reading the following:
>
>            85072610
>            U1/0.25

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.