Date:         Fri, 28 Aug 1998 00:08:53 -0700
Reply-To:     Randolph Feuerriegel <RFeuerriegel@BC.SYMPATICO.CA>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Randolph Feuerriegel <RFeuerriegel@BC.SYMPATICO.CA>
Subject:      [Fwd: prop/driveshaft alignment how?]
Comments: To: Vanagon@VANAGON.COM
Content-Type: multipart/mixed;

Hello Kurt.

I was wondering the same thing when I installed my driveshaft. I took it
to mean exactly what you wrote. Index the shaft. Also, the front diff
bolts should be loose to remove the shaft. When the shaft is back in,
try moving the front diff a bit so things settle in, then tighten up the
diff bolts. Worked for me.

R.Feuerriegel
88 syncro

[message/rfc822]

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.