Mark McCulley wrote: > > I replaced my ignition switch over the weekend and it fixed the problem I > was having with the coolant warning light sometimes not going out after > starting the engine. Apparently there was enough of a voltage drop in the > +12V coming out of the switch (the two black wires) that the coolant warning > circuit was malfunctioning. > > The moral of this posting is a worn out ignition switch can cause problems > other than starting problems. Volks, That last sentence is so true! On our 87 GL Syncro with electric everything, I have found that the following happen in the order as given: 1. Electric windows no worky; 2. Head lights no worky; 3. Windshield wipers no worky; 4. A/C no worky; 5. Any and all electrical aux. systems that are wired through "said switch" no worky. This includes radio. SSSOOOoooooooooo..... . . . . .Carry a Spare and the tools needed! Tyrone Big Pine Key, FL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.